Excess vibration wears out the bearings, outer tub and suspension springs of washing machines. Additionally, a washing machine that cannot wash clothes without dancing across the floor is at increased risk of snapping belts and cracking housings. If the washing machine in your home starts acting up, contact the experts in domestic appliance repairs in Worthing right away.
How Excess Vibration Damages Washing Machines?
Gentle humming and a bit of shaking during operation are common in washing machines. But when the appliance starts doing the tango across the floor, then something is seriously wrong with it.
With that stated, here are a few ways excess vibration damages washing machines.
Bearing Failure and Seal Degradation
The bearings in a washing machine allow the inner drum to rotate smoothly along its axis at speeds up to 1,200 RPM.
Prolonged excessive vibration on bearings puts asymmetrical pressure on a bearing’s steel balls and races. If this keeps happening, flat spots will start forming on the steel balls, leading to bearing failure.
Over time, failing bearings would generate significant noise and heat, which would, in turn, compromise the watertight seal.
As soon as that happens, water would leak into the motor and the washing machine’s electrical housing. When that happens, the repair bill for the appliance would surely surpass its value.
Suspension and Shock Absorber Fatigue
All modern front- and top-loading washing machines come OEM-fitted with shock absorbers and dampers. The role of these fitments is to prevent the drum of the washing machine from hitting the outer casing.
Excessive vibration stretches the spring within the shock absorber and depletes the hydraulic fluid within the damper. When the suspension of the washing machine eventually fails, the drum may hit the heater element or the door. That will surely lead to catastrophic leaks or electrical shorts.
Internal Wiring and Control Board Damage
Modern washing machines are packed with sensors and sensitive electronics that control almost every function of the appliance.
High-frequency operational vibration can loosen the connectors on circuit boards and break the delicate solder joints. If you notice the content on a washing machine’s digital display flickering, it is too late. The machine’s internal hardware has sustained damage.
How To Reduce Vibrations In A Washing Machine?
For starters, avoid loading up the washing machine with a single heavy item. Instead, balance out the load within the drum. In this way, during washing, rinsing and drying cycles, excess vibration is contained.
Additionally, always make sure the machine is put on level ground. Also, do not forget to lock the washing machine’s wheels before turning it on. If you notice that, even after taking all the above-mentioned measures, the washing machine is still vibrating excessively, it is time to call the experts.
Just make sure you are connecting with an expert in domestic appliance repairs in Worthing. These professionals run mobile service centres. Their work vehicles and bags are packed with the right tools and OEM spare parts.
And remember, repairing is better than replacing. So instead of partaking in the ‘throwaway’ culture, get repairable alliances professionally fixed.
Contact Us
Where We Cover
Accreditations
